221 west industry court deer park, ny 11729-4681 phone (631) 586-7600 fax (631) 242-9798 world wide web - http://www.sensitron.com e-mail address - sales@sensitron.com sensitron semiconductor technical data data sheet 4076, rev. e hermetic silicon carbide rectifier description/ features: a 300-volt, 40 amp, power silicon carbide rectifier in a hermetic to-257 package available screened to any required level no recovery time or reverse recovery losses no temperature influence on switching behavior high temperature option - maximum operation & storage temperature can be increased to 250 o c; use part number prefix as shdt high frequency option - non-magnetic glidcop leads are available for improved performance at high frequency; use part number prefix shdg ceramic seal option ? for ceramic seals use part number prefix shdc maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. unit s peak inverse voltage piv 300 volts maximum dc output current (with t c = 65 o c, for part numbers with p and n suffixes) i o 40 amps maximum dc output current (with t c = 65 o c, for part numbers with single and d suffixes) i o 20 amps maximum repetitive forward surge current per leg (t = 8.3ms, sine) per leg, t c = 25 o c i frm 45 amps maximum non-repetitive forward surge current per leg (t = 10 m s, pulse) per leg, t c = 25 o c i fsm 100 amps maximum junction capacitance (v r =5v) per leg c t 450 pf maximum power dissipation, t c = 25 o c p d 65 w maximum thermal resistance, junction to case (per dual package for common cathode/anode configurations) r q jc 2.5 c/w maximum operating and storage temperature range top, tstg -55 to +175 c electrical characteristics characteristic typ max. unit s maximum forward voltage drop, pulsed t j = 25 c (i f = 10 a per leg) v f t j =150 c 1.35 1.30 1.50 1.45 volts maximum forward voltage drop, pulsed t j = 25 c (i f = 20 a per leg) v f t j = 150 c 1.70 1.75 1.90 2.00 volts maximum reverse current ( i r @ 300v piv per leg) t j = 25 c t j = 150 c 0.04 0.12 0.40 2.00 ma total capacitive charge (v r =200v i f =20a di/dt=200a/ m s t j =25 c) q c per leg 26 n/a nc shd626010 shd626010d shd626010n SHD626010P
221 west industry court deer park, ny 11729-4681 phone (631) 586-7600 fax (631) 242-9798 world wide web - http://www.sensitron.com e-mail address - sales@sensitron.com sensitron semiconductor technical data data sheet 4076, rev. e shd626010 shd626010d shd626010n SHD626010P
221 west industry court deer park, ny 11729-4681 phone (631) 586-7600 fax (631) 242-9798 world wide web - http://www.sensitron.com e-mail address - sales@sensitron.com sensitron semiconductor technical data data sheet 4076, rev. e mechanical dimensions to-257 1 2 3 .200 .190 (5.08 4.82) .045 .035 (1.14 0.89) .120(3.05) bsc .430 .410 (10.92 10.41) .420 .410 (10.67 10.41) .665 .645 (16.89 16.38) .537 .527 (13.64 13.39) 1.132 1.032 (28.75 26.21) .035 .025 (0.89 0.63) 3 places .100(2.54) bsc 2 places .150 .140 (3.81 3.56) dia. pinout table type pin 1 pin 2 pin 3 single rectifier cathode anode anode dual rectifier/common cathode (p) anode 1 common cathode anode 2 dual rectifier/common anode (n) cathode 1 common anode cathode 2 dual rectifier/doubler (d) anode anode/ cathode cathode schematic 1 2 3 1 2 3 1 2 3 3 2 1 single common cathode common anode doubler application note: customers should be aware that at the current stage of technical development of sic, the reverse avalanche capabilities of the device are limited. customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially damaging conditions in their applications. shd626010 shd626010d shd626010n SHD626010P
? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change wi thout prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices t hat feature assured safety o r by means of users? fail-safe prec autions or other arrangement. 3- in no event shall sensitron semiconducto r be liable for any damages that may result from an accident or any other cause duri ng operation of the user?s units according to the datasheet(s). sensitron semiconducto r assumes no responsibility for any intellec tual property claims or any other problems that may result from applications of informatio n, products or circuits described in the d atasheets. 4- in no event shall sensitron semiconduc tor be liable for any failure in a semic onductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form , in whole or part, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or a ny third party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws a nd regulations.
|
